Kitchen Makeover Involving Roofing Repairs and Removing Kitchen Plaster

It might be time for a revamp to your roofing company and kitchen area by taking a long hard look at the condition of your roof and the plaster on the walls in your kitchen.

Would it be considered as a good idea to remove plaster of an older brick heat-vent and expose the architectural side of it? This might be something you could do over a weekend.

But what if your house is an older building where asbestos might be present behind the plasterwork? You may want to take a sample and have it send to a laboratory to have it tested. On the other hand, a leading plaster firm will not only tell you if your plasterwork is safe or not, but they can take care of the actual removal process for you.

Once the lab report comes back, and you discover that everything is just fine with regards to the asbestos content, then you should consider enlisting the services of professional plaster artisans. For any repair work on your shelter covering, you should get in touch with experienced roofers who would likewise have the necessary tools and expertise to ensure a sterling job is done.

Be aware of the fact that plaster dust does not penetrate into everything, chisel the old plasterwork carefully, and masterfully reveal your old brickwork. All this can be achieved over the course of a weekend.

Removing Plaster with Care and Consideration

Great care and consideration should be displayed when wanting to remove any plaster on your kitchen walls. What you need to remember before you even attempt to remove plaster in your kitchen area would be:

To establish what utilities are embedded within the walls adjoining your kitchen walls

Ensure you turn off all power and remove light switch covers as well as plug-in wall plates.

When you intend removing the plaster, it is best to steer clear from adjacent walls to prevent unnecessary damages. Besides, too much hammering and pounding may loosen or crack plaster in areas where you do not want it removed. According to plaster specialists, you can avoid this from happening by creating a barrier to isolate the area you will be working on. This can be achieved by attaching battens of thin wood strips to the corners of adjacent walls thereby reducing reciprocal vibrations.

Proper precautions need to be taken through wearing a dust mask that is graded to protect you from fine dust. Use a very good sledgehammer to knock off the plaster in your kitchen wall. On the other hand, reputed plaster firms can perform these tasks for you by using modern equipment and tools without compromising anyone’s safety.

Professional plaster and roofing firms often make a perfect name for themselves and will carry out any repair work with the greatest care and attention to detail.

Nowadays, more modern techniques and equipment is being used which still require an experienced tradesperson.

Simple tasks like placing a hook used to hang a picture frame often results in large pieces of plaster breaking free or crashing down. Trying to drive a drywall screw can be a very frustrating and time-consuming task. What is more, depending on the strength of the plaster used, drill bits would often fail you when attempting to drill a hole in the wall.

Due to such challenges, plaster contractors like thought it best to list a few tips that will work for you when having to deal with plasterwork:

On hanging a picture from a hook in the wall, it would be considered a good idea to tape a piece of masking tape over the area where you want to drive the nail into. This proves to be an effective way to prevent chipping. You would just remove the masking tape once you are done.

You could also drill a small pilot hole to prepare the way for the wall nail you want to use to hang your picture with. It need not be too deep, and would only have to penetrate the top coat of the wall plaster. Once you notice some brown dust, you won’t have to keep on drilling as it would be an indication that you are through the topcoat.

To successfully drive a screw through plaster, you should always drill a hole first

Never make use of drywall screws to hold something. Even if it seems that that the plaster is strong enough. You risk tearing large chunks of plaster once you hit a weak spot.

Ensure you screw into the wall studs when going through the plaster, and not the wood lath holding the plaster onto the wall. You will bring down large plaster chunks by pulling down the lath.